How to Snowboard

Also, where is the chip the wolf grabbing machine? I can’t find it with the new layout.

You can find the gabbing machine by going to town hall, click on the "historical society" the story was printed on 6/15/2006. Click on the story and you’ll see the link to the machine. (i’d put it in your shortcuts so you don’t have to do all that again)

You can unlock kelly on the snowboarding game if you health and your fitness is at 100%. She earns more points on the flips than the other characters. Make sure to do flips off the snow ramps for extra points!

I am buying a snowboard. I need to know what to get and what is what or whatever. I know it has to do something with bindings and shoes. HELP ME! I don’t want to buy the wrong things and get ripped off. Give me cheap /durable brands too.

Don’t just pick a board between your nose and chin that’s a rookie mistake
You need to take into account a few things your height,weight,riding conditions,riding style"all mountain,freeride,freestyle",foot size and skill lvl
Once you get those nailed down you can narrow down your board genre and size, Generally people go largest on freeride boards for stable carving and float in pow, Mid range for an all mountain board and smallest for those park rats.

That is why just picking a board between your nose and chin doesn’t work and is a huge mistake, If I was looking for a more backcountry oriented board I wouldn’t just pick a board between my nose and chin cause I’d want extra length in the board to help for stable carving and float in pow, samething works for picking a board for the park/freestyle, I wouldn’t just pick a board between my chin and nose for it, I’d want to focus more on a shorter end board to help with maneuverability,butters and just dorking around on runs.

Some simple guidelines you can follow as well is remembering that the longer the board the more stable it will be for you during high speed carves and float in pow, the shorter the board the easier it’ll be to maneuver around, butter and just dork around on runs.

For good brands I’d look at.

GNU
libtech
Omatic
Stepchild
Capita
Neversummer
K2
Forum
Rome

Avoid pretty much all the brands sold at those big retail stores "D&icks,sports check,sports authority,big 5 ect ect". Pretty much all the brands sold there are low end garbage decks that any boarder planning to go a lot shouldn’t bother buying, They’ll only end up holding you back.

I recently bought a winter jacket made by DC, the material is very water resistant but there isn’t much insulation, nor much room to layer underneath. What would you recommend to wear under the jacket to keep warm, I think a hoddie would be too big, and limit moving room.
Also, are jeans or sweats the best way to go under thin snowboard pants? I’m new to the mountain and need to know! Thanks!
Any other (useful) tips about snowboarding are welcome!

Wear a light long sleeve shirt or light sweater under. You don’t want to wear anything heavy because although its cold out you’ll still get hot from using so much energy to snowboard down the mountain. Jeans are horrible to wear under snowboard pants. Normal sweatpants work okay, but I’ve come to find that spandex pants or yoga pants work the best and are the most comfortable.

ive been wondering the same thing and need to learn how so i will be watching your answers. best answer?

ive been wondering the same thing and need to learn how so i will be watching your answers. best answer?

I started snowboarding last year and really like it. so i thought it was time to invest in one. What kind of equipment and gear do i need to buy with it? Does size and shape matter? Help!!!!

The best option is to go to a good board shop and not a big box store (like Big 5 or Copelands) as the people working at the board shop will probably have a better idea as to what they are talking about.

There are tons and tons of choices out there. When buying a board you need to ask yourself a few important questions.

1.)How good am I?
2.)How much do I ride?
3.)Where do I ride?
4.)What conditions do I ride most?
5.)What type of rider am I?

These will help you determine what board is going to be best for you.

Boards specs are confusing but I’ll try and breakdown the important ones for you and what you need to look for in them.

Length. There is no right or wrong length and some lengths are better for different styles of riding. Remember that your height has nothing to do with it. A board has no idea how tall you are. Most boards have a range of weights that they are suited for. Generally, a longer board is more stable and requires a bit more from it’s rider to perform well and a shorter board is less stable but very easy to manuever. For the most part, freeriders who are riding powder or at very high speeds like a longer board and park riders (especially jibbers) like shorter boards for their reduced swing weight and extra manueverability.

Width. This is possibly the most important measurement. How big are your feet? You should ride a board that is wide enough that your heels and your toes are just above their edges. If you have too much toe or heel drag you will hang up on your turns (excess toe drag leads to excess chin drag). If your board is too wide then it will increase the effort it will take to get the board over on edge. I’ve actually torn the arch of my foot riding a board that was too wide (yeah, it hurt). Go for the narrowest board possible as the performance gains of quick edge control far outweigh the minimal benefit the extra width will gain you in deep snow. It’s a good idea to bring your boots with you to the shop to help with this.

Sidecut. When you look at a board you can see that the sides of it are cut in. If you use your imagination, you can see that this cut actually begins the arc of a circle. A board with more cut draws a smaller circle and is better suited for smaller turns. A board with less cut draws out a bigger circle for bigger turns. Generally, park riders like a board with more cut as they need that added manueverability to line up the features in the park. A freerider is usually riding faster and making bigger turns than a park rider so they usually go for a board with less cut. Also, a board with deeper cut can "hook" in powder a bit. Keep in mind that it is easier to get a longer turn out of a board with more cut than it is to get a shorter turn out of a board with less cut. (am I confusing you yet?)

Flex. This is the most subjective part to buying a board. A stiffer board is much more stable and responsive but requires more attention from it’s rider and will fatigue you more. A softer board is very comfortable and easy to ride but will not respond as well or be as stable, especially at speed. Jibbers like soft boards as they are less likely to hook up on the rails and freeriders like the response of stiffer boards. Most boards these days are built with a flex pattern, meaning that they can be stiff in a certain aspect and soft in another. A great park board will have a stiffer tip and tail for better pop and stability in landing but will have a soft torsional (side to side) flex that will help on the rails or when coming up a little short landing a spin. A great freeride board will be stiff in the tail and underfoot for better drive and softer in the tip to help turn initiation as well as for better float in deep snow. A halfpipe board will be stiff everywhere for maximum pop and edge hold.

Don’t let a sales person down sell you. While it’s true that you won’t need (or even be able to tell the difference with) a high end board I try and never sell anyone a "beginner" board. You are going to be intermediate or better far longer than you’ll be a beginner. Boards companies I like right now are Burton (check out the Air and the Custom), K2 (the Podium is sweet) and Rome (the Agent, Anthem and Artifact are amazing boards)

Good luck

I suggest you learn how to turn on a part of a hill that no one is using and there’s no trees, rocks, or jumps so you don’t get hurt or injure anyone in the process. Everyone has their own unique way of riding but the way I do it is to first get comfortable with the terrain (obviously) and when you want to turn the way your back is facing, lean back slightly, going to your heals on the board. Bend you knees and focus on your balance. Start using your front foot to steer the board sideways but not too much or you can fall if you’re not going fast enough. When you want to turn to the direction your toes are pointing to, lean forward to be standing on you toes and do the same.

I suggest you learn how to turn on a part of a hill that no one is using and there’s no trees, rocks, or jumps so you don’t get hurt or injure anyone in the process. Everyone has their own unique way of riding but the way I do it is to first get comfortable with the terrain (obviously) and when you want to turn the way your back is facing, lean back slightly, going to your heals on the board. Bend you knees and focus on your balance. Start using your front foot to steer the board sideways but not too much or you can fall if you’re not going fast enough. When you want to turn to the direction your toes are pointing to, lean forward to be standing on you toes and do the same.

Watch some snowboard tips from Dave Baln at Glen Eden in this video.

Duration : 0:0:33

[youtube XooJpo35XgA]

http://www.snowboardingzone.org/
Learning To Ride A Snowboard:
Get a free set or Snowboarder ebooks for joining our free snowboarding community. There are snowboarding articles, forums, boarder videos, snow boarding guides and more…
Come visit us today for Free Snowboarding EBooks!

Duration : 0:3:28

[youtube xfTC76m52rw]